|
|
Used to manufacturer core wire,support wire,eduction wire..etc. widely used in electron and lighting industries.
|
First: Lighting molybdenum wire |
1.Black molybdenum wire |
| Material | Grade | Capability and applications |
| Pure molybdenum | DMSC | Good ductibility, mainly used as eduction wire. |
| Good ductibility, mainly used as eduction wire | DMSL | Adulterant Lanthanum ( Lan.): Fine heating resistance, Re-crystal temperature over than 1500℃. |
| Adulterant Si.Al.K | DMSK | Good heating resistance, Re-crystal temperature over than 1500℃,and also good coiling and forming capability. |
| Adulterant Yt | DMSY | Good capability of oxidation resistance and brazing. High strength. |
| Grade | Dimension(mm) | Diameter tolerance |
| DMSC DMSL | Φ1.0－0.04 | Support wire±2% Core wire±1% |
| DMSK DMSY |
|
2.White molybdenum wire |
A.Normal white molybdenum wire used as support,core wire,eduction wire for lamps;
B.Alignment white molybdenum wire: fine linearity - 95% Min.:
C.Seal wire: excellent surface shining, used as seal materials for the lamps.
|
| Meterial | Grade | Dimension (mm) | Diameter tolerance |
| Pure molybdenum | BMSC | Φ3.0－0.15 | Support wire±2% Core wire±1% |
| Adulterant Lanthanum ( Lan.): | BMSL |
|
Second: Spray molybdenum wire |
|
Used as surface spray coating for the wear parts. |
| Grade | Dimension(mm) | Diameter tolerance |
| PMSC | Φ3.2-1.45 | 3.175+0/-0.05 |
| 3.125±0.02 |
| 2.3±0.03 |
| 2.3-1.45±0.02 |
|
Third:Heating molybdenum wire |
|
Used to manufacture the electric cooker accessory. |
| Material | Grade | Dimension(mm) | Diameter tolerance |
| Pure molybdenum | ZMSC | Φ3.0-1.0 | ±0.02 |
| Adulterant Lanthanum ( Lan.) | ZMSL |
|
Fourth: Wire cutting molybdenum wire |
|
Used for EDM wire cutting. |
| Material | Grade | Dimension(mm) | Diameter tolerance |
| Pure molybdenum | QLSC | Φ0.24-0.20 | ±0.004 |
| Φ0.20-0.15 | ±0.003 |
| Φ0.15-0.10 | ±0.002 |
|
※QLSC：OLSC: suitable for wire cutting mould steel,cemented carbide,magnetism materials. Suitable for wire cutting with low electric current, surface shining, short cutting time and big machining area.
|
| Grade | Grade | Dimension(mm) | Diameter tolerance |
| Adulterant Lanthanum ( Lan.) | QMSL
QLSL | ￠0.24-0.20 | ±0.004 |
| ￠0.20-0.15 | ±0.003 |
| ￠0.15-0.10 | ±0.002 |
|
※QMSL,OMSL: Adulterant rare components, with good electric causticity resistance during EDM wire cutting. Suitable for the machining with big electric current (3A-5A), high efficiency and not so high requirement on surface shining. With long using life.
|
Fifth: Re-draw molybdenum wire |
|
Used for re-draw fine molybdenum wire. |
| Grade | Grade | Dimension(mm) | Diameter tolerance |
| Pure molybdenum | LMSC | Φ2.4－0.3 | ±2% |
| Adulterant Lanthanum ( Lan.) | LMSL |
|
